| |
|
RCI International Convention Proceedings (2003)
Proceedings of the RCI 18th International Convention & Trade Show.
Papers include:
- Achieving Working and Effective Air Barriers, by Wagdy Anis, AIA
- Dynamic Wind Uplift Performance of Thermoplastic Roofing System with New Seaming
Technology, by Dr. A. “Bas” Baskaran
- Acrylic Coatings Used in Low and, by James T. Connaughton, Joseph M. Rokowski, and Thomas Ennis
- The Design Process, the 75% Rule, by Richard L. Cook Jr., RRC, CPWC, RRO
- Solderable Metal Roof and Gutter Systems; Their Identification, Characteristics, Installation Techniques and How to Conduct System Inspections and Assessments, by Robert L. Fulmer
- Contractors’ Instructions: A Forensic Engineering and Legal Perspective, by Derek A. Hodgin, P.E., RRC, RRC; and Luther O. McCutchen, Esquire
- Manufacturer Standard Details: Reinforcing Accepted Standards as Common Knowledge, by John J. Serke, AIA, RRC
- Engineering Performance of Rooftop Gardens: A Field Evaluation, by Karen Liu, PhD
|
|
|
|
| |
|
RCI International Convention Proceedings (2004)
A compilation of papers presented at RCI’s 19th International Convention and Trade Show, March 31 - April 6, 2004 in Reno, NV.
Papers include:
- Design Guidelines for the Wind Uplift Resistance of Architectural Metal Roofing Systems, by A. Baskaran and H. Ham
- Slate Roof System Inspection and Reporting Techniques, by Robert Fulmer
- The New Shingle Wind Resistance Test Standards, by Louis Hahn, PhD, David Roodvoets, and Kenneth D. Rhodes
- Phenolic Insulation and the Building Envelope, by Donald W. Kilpatrick and Michael G. Taylor, Esq.
- Mega-residential Reroofing, by Ken Kosloff
- Reroof Project Case Study: Denver International Airport Terminal Flat Roofs, by Nick A. Lovato
- Daytime Infrared Roof Inspections (You Can Get a Good Night’s Sleep!), by Ronald D. Lucier
- Long-term Reflective Performance of Roof Membranes, by David L. Roodvoets, William A. Miller, and André O. Desjarlais
- The Application of Sprayed Polyurethane Foam and Elastomeric Coatings for Repair andMaintenance of Bituminous Roof Systems, by Robb Smith, RRC, RRO, FRCI, and Dan Varvais
- Good Architecture, Poor Roof: A Case Study of How the Architect, General Contractor, and Roofing Contractor Failed to Perform, by Thomas L. Smith, AIA, RRC
- Overview of New Wind Design Guide for Mechanically Attached Roof Systems, by Thomas L. Smith, AIA, RRC
- EPDM Roof Membranes: Long-term Performance Revisited , by Tim Trial, Ross Robertson
|
|
|
|
| |
|
RCI International Convention Proceedings (2005)
Proceedings of the RCI 20th International Convention & Trade Show, March 31 - April 6, 2005 in Maimi, Florida.
Papers include:
- Delineation of Roof Design Services, by Richard P. Canon, FRCI, RRC, PE
- Suggestions to Engineers for the Review of Contracts and Preparation for and Presentation of Testimony, by Carl G. Cash, PE
- SPRI/ANSI Standards: Standardizing Roof System Performance, by Stan Choiniere
- LEED™ Accreditation and Certification as it Applies to the Roof Consultant, by Richard L. Cook Jr., RRC, RRO, CPWC, LEED ™ AP and Thomas Hutchinson, AIA, RRC
- Tile Roof Systems: Analysis and Inspection Techniques for Roof Consultants, by Robert L. Fulmer
- Field Investigation and Laboratory Testing of Exposed Poly(vinyl Chloride) Roof Systems, by Stanley P. Graveline, Hans-Rudolph Beer, Ralph M. Paroli, and Ana H. Delgado
- Advancing Sustainable Roofing: LEED™ and the Commercial Roofing Industry, by James L. Hoff and Samir Ibrahim
- How do Roofs Wear Out?, by William A. Kirn, RRC
- Selling Professional Roofing Services in the Roofing Industry Today, by Bob Lyons, FRCI
- Fastener Corrosion in ACQ and Other “Next Generation” Treated Lumber, by Gary P. Martini and Heinz Wieland
- Issues to Consider Regarding Self-adhering TPO Single-ply Membranes, by Helene Hardy Pierce, Edward Nebesnak, William Woodring, and David Scott
- A New Look at Ballasted Roof Performance, by David L. Roodvoets
- Design Considerations for Cold Interior Environments, by Ray Wetherholt, PE, RRC, CPWC
|
|
|
|
|
